Pre-Check:
How to decide the max lun side that can be added in a VG
Suppose sapdbvg12 VG need to be extended
ax10p03::/home/pg53ot=> lsvg sapdbvg12
VOLUME GROUP:
sapdbvg12 VG
IDENTIFIER:
0037031a00004c00000000f8d788c643
VG STATE: active PP
SIZE: 32 megabyte(s)
VG PERMISSION:
read/write TOTAL
PPs: 4732 (151424 megabytes)
MAX LVs:
256 FREE
PPs: 1234 (39488 megabytes)
LVs:
5 USED PPs: 3498 (111936 megabytes)
OPEN LVs:
5
QUORUM: 3 (Enabled)
TOTAL PVs:
4 VG
DESCRIPTORS: 4
STALE PVs:
0 STALE
PPs: 0
ACTIVE PVs:
4 AUTO
ON: yes
MAX PPs per VG: 32512
MAX PPs per PV:
2032 MAX
PVs: 16
LTG size:
128 kilobyte(s) AUTO
SYNC: no
HOT SPARE:
no BB
POLICY: relocatable
ax10p03::/home/pg53ot=>
Now multiply Max PP per VG to PP size, it will give max lun
size.
32512 * 32 = 65024
- Means 65GB can be allocated max
How to make sure new powerpath device is not having data
as sometime someone else might have run the cfgmgr and it becomes difficult to
identify the power device.
New Lun id 55F8 –> 131 GB
1> # powermt
display dev=all | grep 55F8
2> # powermt
display dev=hdiskpower51
Pseudo name=hdiskpower51
Symmetrix ID=000295700123
Logical device ID=55F8
state=alive; policy=SymmOpt; priority=0; queued-IOs=0;
==============================================================================
--------------- Host --------------- - Stor -
-- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf.
Mode State Q-IOs Errors
==============================================================================
0 fscsi0 hdisk323 FA
8gA active alive
0 0
0 fscsi0 hdisk324 FA 10gA
active alive 0
0
0 fscsi0 hdisk325 FA
6gA active alive
0 0
3> To confirm the size
# bootinfo -s hdiskpower51
131077
4> To check it is not part of
any VG
# lspv hdiskpower51
0516-304 : Unable to find device id hdiskpower51 in the
Device
Configuration
Database.
# lspv hdiskpower50
PHYSICAL VOLUME:
hdiskpower50 VOLUME
GROUP: appsvg
PV IDENTIFIER:
00cd1fc66693f57a VG IDENTIFIER 00cd1fc600004c00000001478a24da23
PV STATE:
active
STALE PARTITIONS:
0
ALLOCATABLE: yes
PP SIZE: 32
megabyte(s) LOGICAL
VOLUMES: 2
TOTAL PPs:
1021 (32672 megabytes) VG
DESCRIPTORS: 2
FREE PPs: 29
(928 megabytes) HOT SPARE: no
USED PPs:
992 (31744 megabytes) MAX
REQUEST: 1 megabyte
FREE DISTRIBUTION:
00..00..00..00..29
USED DISTRIBUTION:
205..204..204..204..175
5>Make sure this is not part of
rootvg, extra precaution
# lsvg -p rootvg
rootvg:
PV_NAME PV
STATE TOTAL PPs FREE PPs
FREE DISTRIBUTION
hdisk150
active 543 250 61..00..00..80..109
# powermt display
dev=hdisk150
Pseudo name=hdiskpower12
Symmetrix ID=000295700123
Logical device ID=0806
So rootvg is having hdiskpower12 only.
*******************************
1> Check the powerdevices
In case of no powerdevices
aur6051l:Bansalr1[2284]#
lsvg
rootvg
nim6051T2C
aur6051l:Bansalr1[2286]# lspv | awk '{print $1}' | grep hdiskpower
hdiskpower0
hdiskpower1
hdiskpower2
2> Detect the luns
aur6051l:Bansalr1[2292]# cfgmgr -v
cfgmgr is running in phase 2
----------------
Output truncated.
aur6051l:Bansalr1[2295]# lspv | awk '{print $1}' | grep hdiskpower
hdiskpower0
hdiskpower1
hdiskpower2
hdiskpower3
It shows hdiskpower3 is added
3> Check the size of the luns
aur6051l:Bansalr1[2296]# bootinfo -s hdiskpower3
512001
aur6051l:Bansalr1[2297]# lsattr -El hdiskpower3
PR_key_value
none Reserve
Key.
True
clr_q
yes Clear Queue
(RS/6000) True
location
Location True
lun_id
0x3000000000000 LUN ID False
lun_reset_spt
yes FC Forced Open
LUN True
max_coalesce 0x100000 Maximum coalesce size True
max_transfer
0x100000 Maximum
transfer size
True
pvid
none Physical volume
identifier False
pvid_takeover yes Takeover PVIDs from hdisks True
q_err no Use QERR bit True
q_type
simple Queue TYPE False
queue_depth 32 Queue DEPTH True
reassign_to
120 REASSIGN time
out value True
reserve_policy single_path Reserve Policy used to reserve device
on open. True
rw_timeout 40 READ/WRITE time out True
scsi_id
0x8a0180 SCSI ID False
start_timeout
180 START unit time
out True
ww_name 0x50000975000265ac World Wide Name
False
aur6051l:Bansalr1[2298]# lsattr -El hdiskpower2
PR_key_value
none
Reserve Key. True
clr_q
yes Clear Queue (RS/6000) True
location
Location True
lun_id
0x2000000000000
LUN ID
False
lun_reset_spt
yes
FC Forced Open LUN True
max_coalesce
0x100000
Maximum coalesce size True
max_transfer
0x100000 Maximum transfer size True
pvid
00c32b77653d6be70000000000000000 Physical volume identifier False
pvid_takeover
yes
Takeover PVIDs from hdisks True
q_err no Use QERR
bit
True
q_type
simple
Queue TYPE False
queue_depth 32 Queue DEPTH True
reassign_to
120
REASSIGN time out value True
reserve_policy no_reserve Reserve Policy used to
reserve device on open. True
rw_timeout 40 READ/WRITE time
out True
scsi_id
0x8a0180
SCSI ID False
start_timeout
180
START unit time out True
ww_name
0x50000975000265ac
World Wide Name False
4> Set the device attr according to old luns
aur6051l:Bansalr1[2300]# chdev -l hdiskpower3 -a reserve_policy=no_reserve -a queue_depth=32
hdiskpower3 changed
aur6051l:Bansalr1[2301]# lsvg -o
nim6051T2C
rootvg
5> Luns are detected, now add them in the Volume Group
aur6051l:Bansalr1[2307]# extendvg nim6051T2C hdiskpower3
0516-1254 extendvg: Changing the PVID in the ODM.
aur6051l:Bansalr1[2308]# lsvg nim6051T2C
VOLUME GROUP:
nim6051T2C VG
IDENTIFIER:
00c32b7700004c000000013b97085b50
VG STATE:
active PP
SIZE: 256 megabyte(s)
VG PERMISSION:
read/write TOTAL PPs: 3598 (921088 megabytes)
MAX LVs:
256 FREE
PPs: 2009 (514304 megabytes)
LVs:
7 USED
PPs: 1589 (406784 megabytes)
OPEN LVs:
7 QUORUM: 2 (Enabled)
TOTAL PVs:
2 VG
DESCRIPTORS: 3
STALE PVs:
0 STALE
PPs: 0
ACTIVE PVs:
2 AUTO
ON: yes
MAX PPs per VG:
32768 MAX PVs: 1024
LTG size (Dynamic): 1024 kilobyte(s) AUTO SYNC: no
HOT SPARE:
no BB
POLICY: relocatable
MIRROR POOL STRICT: off
PV RESTRICTION: none INFINITE RETRY: no
DISK BLOCK SIZE:
512
6> Increase the file system
Run below command in case you want to add same hdiskpower to
the file system
Here PP Size of ftxd1_lv is 512MB and we want to increase it
by 100GB, so add 200 PP by below command.
aur6051l:mksysb[2313]# extendlv
ftxd1_lv 200 hdiskpower3
0516-787 extendlv: Maximum allocation for logical volume
ftxd1_lv
is 1300.
aur6051l:mksysb[2313]# chlv
-x 1600 ftxd1_lv
aur6051l:mksysb[2313]# extendlv
ftxd1_lv 200 hdiskpower3
ftxd1_lv is LV for file system /export/nim/mksysb
Note: Above steps
can be skipped if there is no specific need to add the assigned lun to the file
system.
aur6051l:mksysb[2313]# chfs
-a size=+150G /export/nim/mksysb
0516-787 extendlv: Maximum
allocation for logical volume mksysb6051
is 1024.
aur6051l:mksysb[2314]# chlv
-x 4096 mksysb6051
aur6051l:mksysb[2315]# chfs
-a size=+150G /export/nim/mksysb
Filesystem size changed to 633339904
Note: In case of no power devices, follow below. Use hdiskX
instead of hdiskpowerXX
************************************************
chdev -l hdisk7 -a reserve_policy=no_reserve -a
queue_depth=8
extendvg nimvg hdisk7
lsvg nimvg
df -g
chfs -a size=+75G /export/nim/mksysb_vionim
Vg/Lv/File System
Creation:
To Create below file
system:
/dev/psasworkgsba606
15728640 15664308 1%
20 1% /proj/sasdev/saswork/GuestBatch
Create VG with PPsize 256
#mkvg -y
saswork6064T2P 60 -s 256 hdiskpower90
#mkdir /proj/sasdev/saswork/GuestBatch
#mklv -t jfs2 -y
psasworkgsba606 saswork6064T2P 60
#/usr/sbin/crfs -v
jfs2 -d /dev/psasworkgsba606 -m /proj/sasdev/saswork/GuestBatch -A yes -p rw -a
options='nosuid,nodev' -a agblksize=4096 -a logname=INLINE -a isnapshot=yes -u
saswork6064T2P
#mount
/proj/sasdev/saswork/GuestBatch
Extending the file system having stripe LV
1>
Discover the luns
#cfgmgr -vl fcs0 ;
cfgmgr -vl fcs3 ; cfgmgr -vl fcs1 ; cfgmgr -vl fcs2
#powermt config
#lspv | grep power
2>
Check the size of the luns
#bootinfo -s $i
3>
Check the attributes of an existing lun and set those
values to new lun
#lsattr -El
hdiskpower26
#chdev -l
hdiskpower27 -a pv=yes
#chdev -l
hdiskpower27 -a reserve_policy=no_reserve -a queue_depth=32
#lslv oidatas1p4095
LOGICAL VOLUME: oidatas1p4095 VOLUME GROUP: bhip4095T2CR_1
LV IDENTIFIER: 00c32b8700004c0000000149eb547562.1
PERMISSION: read/write
VG STATE: active/complete LV STATE: opened/syncd
TYPE: jfs2 WRITE VERIFY: off
MAX LPs: 5114 PP SIZE: 256 megabyte(s)
COPIES: 1 SCHED POLICY: striped
LPs: 5114 PPs: 5114
STALE PPs: 0 BB POLICY: relocatable
INTER-POLICY: maximum RELOCATABLE: no
INTRA-POLICY: middle UPPER BOUND: 6
MOUNT POINT: /opt/ibm/datasets1 LABEL: /opt/ibm/datasets1
DEVICE UID: 0 DEVICE GID: 0
DEVICE PERMISSIONS: 432
MIRROR WRITE CONSISTENCY:
on/ACTIVE
EACH LP COPY ON A SEPARATE PV
?: yes (superstrict)
Serialize IO ?: NO
INFINITE RETRY: no PREFERRED READ: 0
STRIPE WIDTH:
2
STRIPE SIZE:
64k
DEVICESUBTYPE: DS_LVZ
COPY 1 MIRROR POOL: None
COPY 2 MIRROR POOL: None
COPY 3 MIRROR POOL: None
Here two luns are required since depth
of the LV is 2.
4>
To check the
#lsvg -P
bhip4095T2CR_1
#extendvg
bhip4095T2CR_1 hdiskpower27
Same way add the hdiskpower28 as well.
#chpv -p
ibm_datasets1 hdiskpower27 hdiskpower28 (ibm_datasets1 is mirror pool , lsvg –P
bhip4095T2CR_1)
#lsvg -P
bhip4095T2CR_1
Physical Volume
Mirror Pool
hdiskpower6
ibm_datasets1
hdiskpower7
ibm_datasets1
hdiskpower8
ibm_datasets2
hdiskpower9
ibm_datasets2
hdiskpower13
ibm_datasets3
hdiskpower14
ibm_datasets3
output truncated
5>
Increase the Upper Bound of LV
#chlv -u 6
oidatas1p4095
6> Extend
the LV bby 2046 which the total of two luns added to VG bhip4095T2CR_1
#extendlv
oidatas1p4095 2046 hdiskpower27 hdiskpower28
7>
In case it don’t allow to extend, increase the value of
PP
#chlv -x 5114
oidatas1p4095
#extendlv
oidatas1p4095 2046 hdiskpower27 hdiskpower28
8>
Increase the file system
#chfs -a
size=+523776M /opt/ibm/datasets1
How to decide the max lun side that can be added in a VG
Suppose sapdbvg12 VG need to be extended
ax10p03::/home/pg53ot=> lsvg sapdbvg12
VOLUME GROUP:
sapdbvg12 VG
IDENTIFIER:
0037031a00004c00000000f8d788c643
VG STATE: active PP
SIZE: 32 megabyte(s)
VG PERMISSION:
read/write TOTAL
PPs: 4732 (151424 megabytes)
MAX LVs:
256 FREE
PPs: 1234 (39488 megabytes)
LVs:
5 USED PPs: 3498 (111936 megabytes)
OPEN LVs:
5
QUORUM: 3 (Enabled)
TOTAL PVs:
4 VG
DESCRIPTORS: 4
STALE PVs:
0 STALE
PPs: 0
ACTIVE PVs:
4 AUTO
ON: yes
MAX PPs per VG: 32512
MAX PPs per PV:
2032 MAX
PVs: 16
LTG size:
128 kilobyte(s) AUTO
SYNC: no
HOT SPARE:
no BB
POLICY: relocatable
ax10p03::/home/pg53ot=>
Now multiply Max PP per VG to PP size, it will give max lun
size.
32512 * 32 = 65024
- Means 65GB can be allocated max
How to make sure new powerpath device is not having data
as sometime someone else might have run the cfgmgr and it becomes difficult to
identify the power device.
New Lun id 55F8 –> 131 GB
1> # powermt
display dev=all | grep 55F8
2> # powermt
display dev=hdiskpower51
Pseudo name=hdiskpower51
Symmetrix ID=000295700123
Logical device ID=55F8
state=alive; policy=SymmOpt; priority=0; queued-IOs=0;
==============================================================================
--------------- Host --------------- - Stor -
-- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf.
Mode State Q-IOs Errors
==============================================================================
0 fscsi0 hdisk323 FA
8gA active alive
0 0
0 fscsi0 hdisk324 FA 10gA
active alive 0
0
0 fscsi0 hdisk325 FA
6gA active alive
0 0
3> To confirm the size
# bootinfo -s hdiskpower51
131077
4> To check it is not part of
any VG
# lspv hdiskpower51
0516-304 : Unable to find device id hdiskpower51 in the
Device
Configuration
Database.
# lspv hdiskpower50
PHYSICAL VOLUME:
hdiskpower50 VOLUME
GROUP: appsvg
PV IDENTIFIER:
00cd1fc66693f57a VG IDENTIFIER 00cd1fc600004c00000001478a24da23
PV STATE:
active
STALE PARTITIONS:
0
ALLOCATABLE: yes
PP SIZE: 32
megabyte(s) LOGICAL
VOLUMES: 2
TOTAL PPs:
1021 (32672 megabytes) VG
DESCRIPTORS: 2
FREE PPs: 29
(928 megabytes) HOT SPARE: no
USED PPs:
992 (31744 megabytes) MAX
REQUEST: 1 megabyte
FREE DISTRIBUTION:
00..00..00..00..29
USED DISTRIBUTION:
205..204..204..204..175
5>Make sure this is not part of
rootvg, extra precaution
# lsvg -p rootvg
rootvg:
PV_NAME PV
STATE TOTAL PPs FREE PPs
FREE DISTRIBUTION
hdisk150
active 543 250 61..00..00..80..109
# powermt display
dev=hdisk150
Pseudo name=hdiskpower12
Symmetrix ID=000295700123
Logical device ID=0806
So rootvg is having hdiskpower12 only.
*******************************
1> Check the powerdevices
In case of no powerdevices
aur6051l:Bansalr1[2284]#
lsvg
rootvg
nim6051T2C
aur6051l:Bansalr1[2286]# lspv | awk '{print $1}' | grep hdiskpower
hdiskpower0
hdiskpower1
hdiskpower2
2> Detect the luns
aur6051l:Bansalr1[2292]# cfgmgr -v
cfgmgr is running in phase 2
----------------
Output truncated.
aur6051l:Bansalr1[2295]# lspv | awk '{print $1}' | grep hdiskpower
hdiskpower0
hdiskpower1
hdiskpower2
hdiskpower3
It shows hdiskpower3 is added
3> Check the size of the luns
aur6051l:Bansalr1[2296]# bootinfo -s hdiskpower3
512001
aur6051l:Bansalr1[2297]# lsattr -El hdiskpower3
PR_key_value
none Reserve
Key.
True
clr_q
yes Clear Queue
(RS/6000) True
location
Location True
lun_id
0x3000000000000 LUN ID False
lun_reset_spt
yes FC Forced Open
LUN True
max_coalesce 0x100000 Maximum coalesce size True
max_transfer
0x100000 Maximum
transfer size
True
pvid
none Physical volume
identifier False
pvid_takeover yes Takeover PVIDs from hdisks True
q_err no Use QERR bit True
q_type
simple Queue TYPE False
queue_depth 32 Queue DEPTH True
reassign_to
120 REASSIGN time
out value True
reserve_policy single_path Reserve Policy used to reserve device
on open. True
rw_timeout 40 READ/WRITE time out True
scsi_id
0x8a0180 SCSI ID False
start_timeout
180 START unit time
out True
ww_name 0x50000975000265ac World Wide Name
False
aur6051l:Bansalr1[2298]# lsattr -El hdiskpower2
PR_key_value
none
Reserve Key. True
clr_q
yes Clear Queue (RS/6000) True
location
Location True
lun_id
0x2000000000000
LUN ID
False
lun_reset_spt
yes
FC Forced Open LUN True
max_coalesce
0x100000
Maximum coalesce size True
max_transfer
0x100000 Maximum transfer size True
pvid
00c32b77653d6be70000000000000000 Physical volume identifier False
pvid_takeover
yes
Takeover PVIDs from hdisks True
q_err no Use QERR
bit
True
q_type
simple
Queue TYPE False
queue_depth 32 Queue DEPTH True
reassign_to
120
REASSIGN time out value True
reserve_policy no_reserve Reserve Policy used to
reserve device on open. True
rw_timeout 40 READ/WRITE time
out True
scsi_id
0x8a0180
SCSI ID False
start_timeout
180
START unit time out True
ww_name
0x50000975000265ac
World Wide Name False
4> Set the device attr according to old luns
aur6051l:Bansalr1[2300]# chdev -l hdiskpower3 -a reserve_policy=no_reserve -a queue_depth=32
hdiskpower3 changed
aur6051l:Bansalr1[2301]# lsvg -o
nim6051T2C
rootvg
5> Luns are detected, now add them in the Volume Group
aur6051l:Bansalr1[2307]# extendvg nim6051T2C hdiskpower3
0516-1254 extendvg: Changing the PVID in the ODM.
aur6051l:Bansalr1[2308]# lsvg nim6051T2C
VOLUME GROUP:
nim6051T2C VG
IDENTIFIER:
00c32b7700004c000000013b97085b50
VG STATE:
active PP
SIZE: 256 megabyte(s)
VG PERMISSION:
read/write TOTAL PPs: 3598 (921088 megabytes)
MAX LVs:
256 FREE
PPs: 2009 (514304 megabytes)
LVs:
7 USED
PPs: 1589 (406784 megabytes)
OPEN LVs:
7 QUORUM: 2 (Enabled)
TOTAL PVs:
2 VG
DESCRIPTORS: 3
STALE PVs:
0 STALE
PPs: 0
ACTIVE PVs:
2 AUTO
ON: yes
MAX PPs per VG:
32768 MAX PVs: 1024
LTG size (Dynamic): 1024 kilobyte(s) AUTO SYNC: no
HOT SPARE:
no BB
POLICY: relocatable
MIRROR POOL STRICT: off
PV RESTRICTION: none INFINITE RETRY: no
DISK BLOCK SIZE:
512
6> Increase the file system
Run below command in case you want to add same hdiskpower to
the file system
Here PP Size of ftxd1_lv is 512MB and we want to increase it
by 100GB, so add 200 PP by below command.
aur6051l:mksysb[2313]# extendlv
ftxd1_lv 200 hdiskpower3
0516-787 extendlv: Maximum allocation for logical volume
ftxd1_lv
is 1300.
aur6051l:mksysb[2313]# chlv
-x 1600 ftxd1_lv
aur6051l:mksysb[2313]# extendlv
ftxd1_lv 200 hdiskpower3
ftxd1_lv is LV for file system /export/nim/mksysb
Note: Above steps
can be skipped if there is no specific need to add the assigned lun to the file
system.
aur6051l:mksysb[2313]# chfs
-a size=+150G /export/nim/mksysb
0516-787 extendlv: Maximum
allocation for logical volume mksysb6051
is 1024.
aur6051l:mksysb[2314]# chlv
-x 4096 mksysb6051
aur6051l:mksysb[2315]# chfs
-a size=+150G /export/nim/mksysb
Filesystem size changed to 633339904
Note: In case of no power devices, follow below. Use hdiskX
instead of hdiskpowerXX
************************************************
chdev -l hdisk7 -a reserve_policy=no_reserve -a
queue_depth=8
extendvg nimvg hdisk7
lsvg nimvg
df -g
chfs -a size=+75G /export/nim/mksysb_vionim
Vg/Lv/File System
Creation:
To Create below file
system:
/dev/psasworkgsba606
15728640 15664308 1%
20 1% /proj/sasdev/saswork/GuestBatch
Create VG with PPsize 256
#mkvg -y
saswork6064T2P 60 -s 256 hdiskpower90
#mkdir /proj/sasdev/saswork/GuestBatch
#mklv -t jfs2 -y
psasworkgsba606 saswork6064T2P 60
#/usr/sbin/crfs -v
jfs2 -d /dev/psasworkgsba606 -m /proj/sasdev/saswork/GuestBatch -A yes -p rw -a
options='nosuid,nodev' -a agblksize=4096 -a logname=INLINE -a isnapshot=yes -u
saswork6064T2P
#mount
/proj/sasdev/saswork/GuestBatch
Extending the file system having stripe LV
1>
Discover the luns
#cfgmgr -vl fcs0 ;
cfgmgr -vl fcs3 ; cfgmgr -vl fcs1 ; cfgmgr -vl fcs2
#powermt config
#lspv | grep power
2>
Check the size of the luns
#bootinfo -s $i
3>
Check the attributes of an existing lun and set those
values to new lun
#lsattr -El
hdiskpower26
#chdev -l
hdiskpower27 -a pv=yes
#chdev -l
hdiskpower27 -a reserve_policy=no_reserve -a queue_depth=32
#lslv oidatas1p4095
LOGICAL VOLUME: oidatas1p4095 VOLUME GROUP: bhip4095T2CR_1
LV IDENTIFIER: 00c32b8700004c0000000149eb547562.1
PERMISSION: read/write
VG STATE: active/complete LV STATE: opened/syncd
TYPE: jfs2 WRITE VERIFY: off
MAX LPs: 5114 PP SIZE: 256 megabyte(s)
COPIES: 1 SCHED POLICY: striped
LPs: 5114 PPs: 5114
STALE PPs: 0 BB POLICY: relocatable
INTER-POLICY: maximum RELOCATABLE: no
INTRA-POLICY: middle UPPER BOUND: 6
MOUNT POINT: /opt/ibm/datasets1 LABEL: /opt/ibm/datasets1
DEVICE UID: 0 DEVICE GID: 0
DEVICE PERMISSIONS: 432
MIRROR WRITE CONSISTENCY:
on/ACTIVE
EACH LP COPY ON A SEPARATE PV
?: yes (superstrict)
Serialize IO ?: NO
INFINITE RETRY: no PREFERRED READ: 0
STRIPE WIDTH:
2
STRIPE SIZE:
64k
DEVICESUBTYPE: DS_LVZ
COPY 1 MIRROR POOL: None
COPY 2 MIRROR POOL: None
COPY 3 MIRROR POOL: None
Here two luns are required since depth
of the LV is 2.
4>
To check the
#lsvg -P
bhip4095T2CR_1
#extendvg
bhip4095T2CR_1 hdiskpower27
Same way add the hdiskpower28 as well.
#chpv -p
ibm_datasets1 hdiskpower27 hdiskpower28 (ibm_datasets1 is mirror pool , lsvg –P
bhip4095T2CR_1)
#lsvg -P
bhip4095T2CR_1
Physical Volume
Mirror Pool
hdiskpower6
ibm_datasets1
hdiskpower7
ibm_datasets1
hdiskpower8
ibm_datasets2
hdiskpower9
ibm_datasets2
hdiskpower13
ibm_datasets3
hdiskpower14
ibm_datasets3
output truncated
5>
Increase the Upper Bound of LV
#chlv -u 6
oidatas1p4095
6> Extend
the LV bby 2046 which the total of two luns added to VG bhip4095T2CR_1
#extendlv
oidatas1p4095 2046 hdiskpower27 hdiskpower28
7>
In case it don’t allow to extend, increase the value of
PP
#chlv -x 5114
oidatas1p4095
#extendlv
oidatas1p4095 2046 hdiskpower27 hdiskpower28
8>
Increase the file system
#chfs -a
size=+523776M /opt/ibm/datasets1
No comments:
Post a Comment